Skip to content
Stamford Viking Appliance Repair

Guide

Where Is the Serial Number on a KitchenAid Refrigerator?

Find the model and serial label inside a KitchenAid refrigerator by door style, learn what it reveals, and know what to give a technician before a visit.

By Stamford Viking Appliance Repair
Technician repairing a built-in refrigerator on a same-day visit

A KitchenAid refrigerator’s serial number is printed on the model and serial label inside the fresh-food compartment, and that label sits in one of 3 places depending on the door style. Look on the left-hand interior wall of French door, bottom-freezer and top-freezer models, on the right-hand wall of side-by-side models, and inside the top drawer of double-drawer units.

The model number is on the same label, so one clear photo gives you both. Scan the correct side wall from top to bottom, including behind shelves and crisper bins, and take the picture with your phone’s flash on. If you call Stamford Viking Appliance Repair at (475) 281-3784, that photo makes the first conversation much faster.

Where is the label on each KitchenAid refrigerator style?

For freestanding styles, KitchenAid keeps the label inside the refrigerator section rather than the freezer; double-drawer units are the exception.

Refrigerator styleWhere the label isIf you can’t see it
French doorLeft-hand wall inside the refrigerator compartmentLift out the upper shelf or slide the crisper bin forward
Bottom-freezerLeft-hand wall inside the refrigerator compartmentShine a flashlight behind stored food and bins
Top-freezerLeft-hand wall inside the refrigerator compartmentMove tall bottles away from the side wall
Side-by-sideRight-hand wall inside the refrigerator compartmentClear the tall shelves along the right side
Double-drawerInside the top drawerEmpty the drawer partway and check its inner walls
Built-in or panel-readyVaries by designFollow the label diagram in your owner’s manual

On a French door refrigerator, start on the left wall of the fresh-food side, even though the doors open from the middle.

What if the label is hidden, worn or missing?

Labels get covered far more often than they get lost. A shelf, a crisper bin or a row of jars ends up parked in front of the sticker. Take out whatever is blocking it rather than peeling or scraping the label, which can smear the print.

If the print has faded or the label is torn, try these sources in order:

  1. The owner’s manual, in case someone wrote the numbers in it at installation.
  2. The purchase receipt, delivery paperwork or, if the refrigerator came with the house, the seller’s appliance list.
  3. Your product registration with KitchenAid, if the unit was registered.
  4. A photo from installation or an earlier service visit.

Without either number a technician can still diagnose the problem, but matching parts takes longer.

What do the model and serial numbers tell you?

The model number describes the design: product line, door configuration, size and finish. Every refrigerator built to that design shares it. The serial number belongs to your unit alone and encodes when and where it was built.

That build date tells you how old the refrigerator really is, which helps when you weigh a repair against replacement. KitchenAid’s customer support can read the date from the serial number, and so can a technician.

The model number also points you to the right consumables. KitchenAid recommends replacing the water filter every 6 months, when the filter indicator light comes on, or as needed. The filter number is listed in the Accessories section of the owner’s manual and printed on the side of the old filter, so you can match one before you even find the label.

Why does a technician ask for them before the visit?

With both numbers in hand, a technician can pull the right wiring diagram, technical data and parts list before arriving. Two refrigerators that look identical can use different control boards, fans or sensors, and the serial number settles which version you own. That means fewer return trips for parts.

Write down any code on the display too. These KitchenAid French door codes have steps you can try first:

Code or displayWhat it meansWhat you can checkWhen to call a technician
POPower was lost and the freezer warmed to 18°F (-8°C) or higherPress MEASURED FILL under the blinking Confirm to clear it, then check what thawedIf it returns with no outage
F3 E1A fault KitchenAid asks owners to reset firstCut power for 1 minute, restore it, make sure cooling is on, watch for 1 minuteIf the code persists
COOLING OFFNeither compartment is coolingPress and hold Lock and MEASURED FILL together for 3 seconds; your manual lists exact stepsIf cooling does not resume

For refrigerator repair, a diagnostic visit is typically $95–$149 and common repairs typically run $300–$750. These are typical ranges; the firm quote is given on site after diagnosis. Every band is on the repair pricing page.

Stamford Viking Appliance Repair is an independent service, not manufacturer-authorized, covering Shippan Point, North Stamford, Waterside, Newfield and Cove, plus Darien, New Canaan and Norwalk.

Do Viking refrigerators put the label in the same place?

Not always, which matters in kitchens that mix brands. On Viking 5 Series built-in refrigerators, the model and serial numbers are on the upper interior wall, behind the lighting. On Viking integrated FDREIC, FDFZIC and FDBMIC7360 units, the product plate sits inside the refrigerator compartment on the side opposite the door opening. The Viking page covers the rest of that lineup.

Frequently asked questions

Is the serial number on the back of a KitchenAid refrigerator?

Start inside, not behind the unit: KitchenAid places the label inside the refrigerator compartment. Check the left wall on French door, bottom-freezer and top-freezer models, and the right wall on side-by-sides.

Can I find my KitchenAid model number without the label?

Often, yes: check the owner’s manual, purchase or delivery paperwork and any product registration. For a water filter alone, the filter number is printed on the side of the old filter.

Does the serial number show how old my refrigerator is?

Yes, it encodes the build date. KitchenAid support or a technician can read it for you.

Should I peel the label off to read it?

No, leave it in place. Remove the shelf or bin in front of it and photograph it with the flash, because the next technician will need that label too.

What repairs cost

Straight pricing, no surprises.

These are typical all-in market ranges for parts and labor on premium built-ins across Stamford and southwestern Connecticut. Your exact price is quoted on site after diagnosis — the $95 service call is credited toward the repair.

RepairTypical range
Diagnostic / service call$95–$149
Refrigerator repair (common faults)$300–$750
Sealed-system / compressor repair$800–$2,200
Door gasket / seal replacement$150–$450

Ranges are estimates for reference, not a quote. Genuine OEM parts · 1-Year Parts & Labor Warranty.

4.8★ · Stamford & southwestern Connecticut

Need Expert Appliance Repair?

Call (475) 281-3784 for same-day service in Stamford.

Call Now: (475) 281-3784